:: Journal of Korean Powder Metallurgy Institute ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Densification Behavior of Rhenium Alloy using Master Sintering Curve

Dong Yong Park, Yong Jun Oh, Young Sam Kwon, Seong Taek Lim, Seong Jin Park

Journal of Korean Powder Metallurgy Institute :: Vol.21 No.1 pp.7-15

Doi:https://doi.org/10.4150/KPMI.2014.21.1.7
Open abstract
Effect of Sintering Temperature on the Microstructure and Mechanical Properties of Solid Oxide Fuel Cell Anode Fabricated by Spark Plasma Sintering

Hye Sung Kim^*, Byung Ju Song, Ka Ram Kim

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.6 pp.425-431

Doi:https://doi.org/10.4150/KPMI.2013.20.6.425
Open abstract
The Oxidation Behavior of Sintered STS 316L at High-Temperature in the Air

In Shup Ahn^*, Hye Seong Kim, Jong Pil Lee, Dong Kyu Park

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.6 pp.432-438

Doi:https://doi.org/10.4150/KPMI.2013.20.6.432
Open abstract
The Effect of Binder Content for the Pore Properties of Fe Foam Fabricated by Slurry Coating Process

Jung-Yeul Yun^a*, Jin Ho Choi, Sangsun Yang, Yang-Do Kim^b,*

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.6 pp.439-444

Doi:https://doi.org/10.4150/KPMI.2013.20.6.439
Open abstract
Fabrication of Fe-TiC Composite by High-Energy Milling and Spark-Plasma Sintering

J. S. Kim^*, N. Q. Tuan, H. X. Khoa, N. H. Viet, Y. H. Lee, B. H. Lee

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.5 pp.338-344

Doi:http://10.4150/KPMI.2013.20.5.338
Open abstract
Effect of Added B₄C on the Mechanical Properties of WC/Ni-Si Hardmetal

Gil-Geun Lee^*, Gook-Hyun Ha

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.5 pp.366-370

Doi:http://10.4150/KPMI.2013.20.5.366
Open abstract
A Study of Electro-Discharge-Sintering of Ti-6Al-4V Spherical Powders Doped with Hydroxyapatite by Spex Milling and Its Consolidation Characteristics

W. H. Lee^*, Y. J. Cho, Y. H. Kim, Y. H. Jo, M. J. Kim, H. S. Kim, S. W. Kim, J. H. Park

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.5 pp.376-381

Doi:http://10.4150/KPMI.2013.20.5.376
Open abstract
An Investigation of the Stability of Y₂O₃ and Sintering Behavior of Fe-Based ODS Particles Prepared by High Energy Ball Milling

Jin-Ju Park^b,*, Eun-Kwang Park^a,b, Sung-Mo Hong^b,c, Min-Ku Lee,
Chang-Kyu Rhee, Kyeong-won Seol

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.4 pp.275-279

Doi:https://doi.org/10.4150/KPMI.2013.20.4.275
Open abstract
Fabrication and Characteristic Evaluation of Hybrid Carbon Nanotubes Reinforced SKD11 Cold Work Tool Steel

Sung-sil Jung^*, Je-se Moon, Dae-yeol Lee, Kuk-tae Youn^a,*, Chun-dal Park, Jae-sun Song

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.4 pp.291-296

Doi:https://doi.org/10.4150/KPMI.2013.20.4.291
Open abstract
The Effect of the Additive Elements Alloying Method on the Corrosion Resistance of Sintered STS 316L

In Shup Ahn^*, Hye Seong Kim, Yoo Young Kim, Dong Kyu Park

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.3 pp.203-209

Doi:https://doi.org/10.4150/KPMI.2013.20.3.203
Open abstract
Effect of B₄C Content on the Sintering Characteristics of 6061Al-B₄C Composite Powder

Jin-Ju Park^a,*, Sung-Mo Hong^a,b, Kyoung-Yeol Kim, Min-Ku Lee, Chang-Kyu Rhee, Won-Hyuk Rhee, Yang Kyu Lee

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.3 pp.215-220

Doi:https://doi.org/10.4150/KPMI.2013.20.3.215
Open abstract
Rapid Heating Concepts in Sintering

Randall M. German^*

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.2 pp.85-99

Doi:https://doi.org/10.4150/KPMI.2013.20.2.085
Open abstract
The Effect of Sintering Temperature on the Synthesis of Quartz glass by Fumed Silica Sintering

H. J. Kim^a,*, J. H. Maeng, K. H. Yoon, S. C. Choi

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.2 pp.134-137

Doi:https://doi.org/10.4150/KPMI.2013.20.2.134
Open abstract
Consolidation of Iron Nanopowder by Nanopowder-Agglomerate Sintering at Elevated Temperature

Jai-Sung Lee^*, Joon-Chul Yun, Joon-Phil Choi, Geon-Yong Lee

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.1 pp.1-6

Doi:https://doi.org/10.4150/KPMI.2013.20.1.001
Open abstract
Influence of Particle Size Distribution on Green and Sintered Properties of Fe-Cr-Mo Prealloy Powder

Yong-Jin Kim^{a, *}, Ki-Bong Kim^{a, b}, Sangsun Yang, Yong-Ho Park

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.1 pp.7-12

Doi:https://doi.org/10.4150/KPMI.2013.20.1.007
Open abstract
Synthesis of Ni-based Metallic Glass Composite Fabricated by Spark Plasma Sintering

Bum Sung Kim^*, Song Yi Kim, Bo Kyeong Guem, Min Ha Lee

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.1 pp.33-36

Doi:https://doi.org/10.4150/KPMI.2013.20.1.033
Open abstract
Effect of Sintering Temperature on the High Temperature Oxidation of Fe-Cr-Al Powder Porous Metal Manufactured by Electrospray Process

Kee-Ahn Lee^*, Jae-Sung Oh, Young-Min Kong, Byoung-Kee Kim

Journal of Korean Powder Metallurgy Institute :: Vol.19 No.6 pp.435-441

Doi:https://doi.org/10.4150/KPMI.2012.19.6.435
Open abstract
Fabrication of Ceramic Dental Block by Magnetic Pulsed Compaction

Soon-Jik Hong^*, Hyo-Young Park, Hyo-Seob Kim

Journal of Korean Powder Metallurgy Institute :: Vol.19 No.5 pp.373-378

Doi:https://doi.org/10.4150/KPMI.2012.19.5.373
Open abstract
Effect of the Size and Amount of SiC on the Microstructures and Thermal Conductivities of ZrB₂-SiC Composite Ceramics

Seongwon Kim^*, Chang-Sup Kwon, Yoon-Suk Oh, Sung-Min Lee and Hyung-Tae Kim

Journal of Korean Powder Metallurgy Institute :: Vol.19 No.5 pp.379-384

Doi:https://doi.org/10.4150/KPMI.2012.19.5.379
Open abstract
Sintering and Rolling Behavior of Cu-50In-13Ga Ternary Alloy Powder for Sputtering Target

Hyeon-Taek Son^*, Dae-Won Kim, Yong-Ho Kim, Jung-Han Kim, Dae-Guen Kim, Jong-Hyeon Lee^a , Kwang-Bo Choi

Journal of Korean Powder Metallurgy Institute :: Vol.19 No.4 pp.264-270

Doi:https://doi.org/10.4150/KPMI.2012.19.4.264
Open abstract

1|2|3|4|5