Solid-state sintering mechanism of blended elemental Ti-6Al-4V powders

Youngmoo Kim, Young-Beom Song, Sung Ho Lee

Journal of Korean Powder Metallurgy Institute :: Vol.25 No.2 pp.109-119

Doi:https://doi.org/10.4150/KPMI.2018.25.2.109

Preparation of Sintering Aid for Li₇La₃Zr₂O₁₂ Solid Electrolyte by Heat-treatment of Polymeric Precursors Containing Li and B

Ran-Hee Shin, Sung-Soo Ryu

Journal of Korean Powder Metallurgy Institute :: Vol.25 No.2 pp.151-157

Doi:https://doi.org/10.4150/KPMI.2018.25.2.151

Phase Formation and Physical Properties of SiAlON Ceramics Fabricated by Gas-Pressure Reactive Sintering

Soyul Lee, Jae-Hyeong Choi, Yoonsoo Han, Sung-Min Lee, Seongwon Kim

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.6 pp.431-436

Doi:https://doi.org/10.4150/KPMI.2017.24.6.431

Insulating Behavior of Sintered AlN Ceramics Prepared by High-Energy Bead Milling of AlN Powder

Sung-Soo Ryu, Sung-Min Lee

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.6 pp.444-449

Doi:https://doi.org/10.4150/KPMI.2017.24.6.444

Influence of milling atmosphere on thermoelectric properties of p-type Bi-Sb-Te based alloys by mechanical alloying

Suk-min Yoon, Cheenepalli Nagarjuna, Dong-won Shin, Chul-hee Lee, Babu Madavali, Soon-jik Hong, Kap-ho Lee

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.5 pp.357-363

Doi:https://doi.org/10.4150/KPMI.2017.24.5.357

Microstructure and Electric Contact Properties of Spark Plasma Sintered Ta-Cu Composite

Won Ju, Young-Do Kim, Jae Jin Sim, Sang-Hoon Choi, Soong Keun Hyun, Kyoung Mook Lim, Kyoung-Tae Park

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.5 pp.377-383

Doi:https://doi.org/10.4150/KPMI.2017.24.5.377

Characteristics of WO3-CuO Powder Mixture Prepared by High-Energy Ball Milling in a Bead Mill for the Synthesis of W-Cu Nanocomposite Powder

Hae-Ryong Park, Sung-Soo Ryu

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.5 pp.406-413

Doi:https://doi.org/10.4150/KPMI.2017.24.5.406

Fabrication and Mechanical Property of Fe-20Cu-1C Compacts by SPS process with Different Heating Rate

Jung-Han Ryu, Soo-Sik Shin, Byung-Rok Ryu, Kyung-Sik Kim, Jun-Ho Jang, Ik-Hyun Oh, Kap-Tae Kim, Hyun-Kuk Park

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.4 pp.302-307

Doi:https://doi.org/10.4150/KPMI.2017.24.4.302

Effect of Mn Addition on Sintering Properties of Ti-10wt.%Al-xMn Powder Alloy

Gi-Seung Shin, Yong-Taek Hyun, Nho-Kwang Park, Yong-Ho Park, Dong-Geun Lee

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.3 pp.235-241

Doi:https://doi.org/10.4150/KPMI.2017.24.3.235

Optimization of Spark Plasma Sintering Temperature Conditions for Enhancement of Thermoelectric Performance in Gas-Atomized Bi0.5Sb1.5Te3 Compound

Kwang-yong Jeong, Chul Hee Lee, Peyala Dharmaiah, Soon-Jik Hong

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.2 pp.108-114

Doi:https://doi.org/10.4150/KPMI.2017.24.2.108

Investigation of Spark Plasma Sintering Temperature on Microstructure and Thermoelectric Properties of p-type Bi-Sb-Te alloys

Jin-Koo Han, Dong-won Shin, Babu Madavali, Soon-Jik Hong

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.2 pp.115-121

Doi:https://doi.org/10.4150/KPMI.2017.24.2.115

Microstructure and High Temperature Oxidation Behaviors of Fe-Ni Alloys by Spark Plasma Sintering

Chae Hong Lim, Jong Seok Park, Sangsun Yang, Jung-Yeul Yun, Jin Kyu Lee

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.1 pp.53-57

Doi:https://doi.org/10.4150/KPMI.2017.24.1.53

Effect of Diamond Particle Size on the Thermal Shock Property of High Pressure High Temperature Sintered Polycrystalline Diamond Compact

Ji-Won Kim, Min-Seok Baek, Hee-Sub Park, Jin-Hyeon Cho, Kee-Ahn Lee

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.5 pp.364-371

Doi:https://doi.org/10.4150/KPMI.2016.23.5.364

Fabrication of Solid State Electrolyte Li7La3Zr2O12 thick Film by Tape Casting

Ran-Hee Shin, Samick Son, Sung-Soo Ryu, Hyung-Tae Kim, Yoon-Soo Han

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.5 pp.379-383

Doi:https://doi.org/10.4150/KPMI.2016.23.5.379

Fabrication of Sintered Compact of Fe-TiB2 Composites by Pressureless Sintering of (FeB+TiH2) Powder Mixture

Xuan-Khoa Huynha, Ji Soon Kim

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.4 pp.282-286

Doi:https://doi.org/10.4150/KPMI.2016.23.4.282

Spark Plasma Sintering Behavior and Heat Dissipation Characteristics of the Aluminum Matrix Composite Materials with the Contents of Graphite

Hansang Kwon, Jehong Park, Sungwook Joo, Sanghwui Hong, Jihoon Mun

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.3 pp.195-201

Doi:https://doi.org/10.4150/KPMI.2016.23.3.195

Spark Plasma Sintering of Fe-Ni-Cu-Mo-C Low Alloy Steel Powder

Hong-Hai Nguyen, Minh-Thuyet Nguyen, Won Joo Kim, Ho Yoon Kim, Sung Gye Park, Jin-Chun Kim

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.3 pp.207-212

Doi:https://doi.org/10.4150/KPMI.2016.23.3.207

Fabrication and Mechanical Characteristics of Bulk Nickel/Carbon Nanotube Nanocomposites via the Electrical Explosion of Wire in Liquid and Spark Plasma Sintering Method

Thuyet-Nguyen Minh, Hai-Nguyen Hong, Won Joo Kim, Ho Yoon Kim, Jin-Chun Kim

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.3 pp.213-220

Doi:https://doi.org/10.4150/KPMI.2016.23.3.213

Consolidation to Bulk Ceramic Bodies from Oyster Shell Powder

Kyeong-Sik Cho, Hyun-Kwuon Lee, Jae Hong Min

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.3 pp.221-227

Doi:https://doi.org/10.4150/KPMI.2016.23.3.221

Investigation of Ball Size Effect on Microstructure and Thermoelectric Properties of p-type BiSbTe by Mechanical Alloying

May Likha Lwin, Sang-min Yoon, Babu Madavali, Chul-Hee Lee, Soon-Jik Hong

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.2 pp.120-125

Doi:https://doi.org/10.4150/KPMI.2016.23.2.120