-
Microstructure and Mechanical Properties of CoCrFeMnNi-type High-entropy Alloy Fabricated by Selective Laser Melting: A Review
Jeong Min Park
Journal of Powder Materials :: Vol.29 No.2 pp.132-151
Doi:https://doi.org/10.4150/KPMI.2022.29.2.132
Open abstract
-
Effect of Process Stopping and Restarting on the Microstructure and Local Property of 316L Stainless Steel Manufactured by Selective Laser Melting Process
Hyunjin Joo, Jeongmin Woo, Yongho Sohn, Kee-Ahn Lee
Journal of Powder Materials :: Vol.29 No.1 pp.1-7
Doi:https://doi.org/10.4150/KPMI.2022.29.1.1
Open abstract
-
Effect of Stress Relieving Heat Treatment on Tensile and Impact Toughness Properties of AISI 316L Alloy Manufactured by Selective Laser Melting Process
Dong-Hoon Yang, Gi-Su Ham, Sun-Hong Park, Kee-Ahn Lee
Journal of Powder Materials :: Vol.28 No.4 pp.301-309
Doi:https://doi.org/10.4150/KPMI.2021.28.4.301
Open abstract
-
Effect of Dry-Electropolishing on the High Cycle Fatigue Properties of Ti-6Al-4V Alloy Manufactured by Selective Laser Melting
Dong-Hoon Yang, Young-Kyun Kim, Yujin Hwang, Myoung-Se Kim, Kee-Ahn Lee
Journal of Powder Materials :: Vol.26 No.6 pp.471-476
Doi:https://doi.org/10.4150/KPMI.2019.26.6.471
Open abstract
-
Microstructures and Characterization of Al-Si-Mg Alloy Processed by Selective Laser Melting with Post-Heat-treatment
Gi Seung Lee, Yeong Seong Eom, Kyung Tae Kim
, Byoung Kee Kim, Ji Hun Yu
Journal of Powder Materials :: Vol.26 No.2 pp.138-145
Doi:https://doi.org/10.4150/KPMI.2019.26.2.138
Open abstract
-
Effect of Porosity on Mechanical Anisotropy of 316L Austenitic Stainless Steel Additively Manufactured by Selective Laser Melting
Jeong Min Park, Jin Myoung Jeon, Jung Gi Kim, Yujin Seong, Sun Hong Park, Hyoung Seop Kim
Journal of Powder Materials :: Vol.25 No.6 pp.475-481
Doi:https://doi.org/10.4150/KPMI.2018.25.6.475
Open abstract
-
A study about sculpture characteristic of SKD61 tool steel fabricated by selective laser melting(SLM) process
Jaecheol Yun, Jungho Choe, Ki-Bong Kim, Sangsun Yang, Dong-Yeol Yang, Yong-Jin Kim, Chang-Woo Lee, Ji-Hun Yu
Journal of Powder Materials :: Vol.25 No.2 pp.137-143
Doi:https://doi.org/10.4150/KPMI.2018.25.2.137
Open abstract
-
The Influence of a Single Melt Pool Morphology on Densification Behavior of Three-Dimensional Structure Fabricated by Additive Manufacturing
Jungho Choe, Jaecheol Yun, Dong-Yeol Yang
, Sangsun Yang
, Ji-Hun Yu, Chang-Woo Lee, Yong-Jin Kim
Journal of Powder Materials :: Vol.24 No.3 pp.187-194
Doi:https://doi.org/10.4150/KPMI.2017.24.3.187
Open abstract
-
Microstructures of Powders and Additively Manufactured Objects of an Alloy Tool Steel for Cold-Work Dies
Jun-Yun Kang, Jaecheol Yun, Hoyoung Kim, Byunghwan Kim, Jungho Choe, Sangsun Yang
, Ji-Hun Yu, Yong-Jin Kim
Journal of Powder Materials :: Vol.24 No.3 pp.202-209
Doi:https://doi.org/10.4150/KPMI.2017.24.3.202
Open abstract
-
Study on Microstructures and Hardness of STS316L Fabricated by Selective Laser Melting
Gi Hun Shin, Joon Phil Choi, Kyung Tae Kim
, Byoung Kee Kim, Ji Hun Yu
Journal of Powder Materials :: Vol.24 No.3 pp.210-215
Doi:https://doi.org/10.4150/KPMI.2017.24.3.210
Open abstract