:: Journal of Powder Materials ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Effect of Particle Sphericity on the Rheological Properties of Ti-6Al-4V Powders for Laser Powder Bed Fusion Process

T. Y. Kim, M. H. Kang, J. H. Kim, J.K. Hong, J.H. Yu, J.I. Lee

Journal of Powder Materials :: Vol.29 No.2 pp.99-109

Doi:https://doi.org/10.4150/KPMI.2022.29.2.99
Open abstract
Microstructural Analysis of STS316L Samples Manufactured by Powder Bed Fusion and Post-heat Treatments

S. Y. Song, D. W. Lee, D. V. Cong, J. W. Kim, S. M. Lee, S. H. Joo, J. C. Kim

Journal of Powder Materials :: Vol.29 No.1 pp.14-21

Doi:https://doi.org/10.4150/KPMI.2022.29.1.14
Open abstract
Parametric Study of Selective Laser Melting Using Ti-6Al-4V Powder Bed for Concurrent Control of Volumetric Density and Surface Roughness

Jeongmin Woo, Ji-Yoon Kim, Yongho Sohn, Kee-Ahn Lee

Journal of Powder Materials :: Vol.28 No.5 pp.410-416

Doi:https://doi.org/10.4150/KPMI.2021.28.5.410
Open abstract
Manufacture of AlSi10Mg Alloy Powder for Powder Bed Fusion(PBF) Process using Gas Atomization Method

Weon Bin Im, Seung Joon Park, Yeo Chun Yun, Byeong Cheol Kim

Journal of Powder Materials :: Vol.28 No.2 pp.120-126

Doi:https://doi.org/10.4150/KPMI.2021.28.2.120
Open abstract
Optimization of Metal Powder Particle Size Distribution for Powder Bed Fusion Process via Simulation

Hwaseon Lee, Dae-Kyeom Kim, Young Il Kim, Jieun Nam, Yong Son, Taek-Soo Kim, Bin Lee

Journal of Powder Materials :: Vol.27 No.1 pp.44-51

Doi:https://doi.org/10.4150/KPMI.2020.27.1.44
Open abstract
Mechanical Property Improvement of the H13 Tool Steel Sculptures Built by Metal 3D Printing Process via Optimum Conditions

Jaecheol Yun, Jungho Choe, Haengna Lee, Ki-Bong Kim, Sangsun Yang, Dong-Yeol Yang, Yong-Jin Kim, Chang-Woo Lee, Ji-Hun Yu

Journal of Powder Materials :: Vol.24 No.3 pp.195-201

Doi:https://doi.org/10.4150/KPMI.2017.24.3.195
Open abstract