:: Journal of Powder Materials ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Porosity Prediction of the Coating Layer Based on Process Conditions of HVOF Thermal Spray Coating

Junhyub Jeon, Namhyuk Seo, Jong Jae Lee, Seung Bae Son, Seok-Jae Lee

Journal of Powder Materials :: Vol.28 No.6 pp.478-482

Doi:https://doi.org/10.4150/KPMI.2021.28.6.478
Open abstract
Effect of Change in Open Porosity as a Function of Uniaxial Molding Pressure on Density Improvement After Impregnation

Sang-Min Lee, Sang-Hye Lee, Jae-Seung Roh

Journal of Powder Materials :: Vol.28 No.1 pp.7-12

Doi:https://doi.org/10.4150/KPMI.2021.28.1.7
Open abstract
Effect of Porosity on Mechanical Anisotropy of 316L Austenitic Stainless Steel Additively Manufactured by Selective Laser Melting

Jeong Min Park, Jin Myoung Jeon, Jung Gi Kim, Yujin Seong, Sun Hong Park, Hyoung Seop Kim

Journal of Powder Materials :: Vol.25 No.6 pp.475-481

Doi:https://doi.org/10.4150/KPMI.2018.25.6.475
Open abstract
Fabrication and Pore Characteristics of Cu Foam by Slurry Coating Process

Dahee Park, Eun-Mi Jung, Sangsun Yang, Jung-Yeul Yun

Journal of Powder Materials :: Vol.22 No.2 pp.87-92

Doi:https://doi.org/10.4150/KPMI.2015.22.2.87
Open abstract
Fabrication of Fe-Cr-Al Porous Metal with Sintering Temperature and Times

Bon-Uk Koo, Su-in Lee, Dahee Park, Jung-Yeul Yun, Byoung-Kee Kim

Journal of Powder Materials :: Vol.22 No.2 pp.100-104

Doi:https://doi.org/10.4150/KPMI.2015.22.2.100
Open abstract
The Effect of Fe and Fe2O3 Powder Mixing Ratios on the Pore Properties of Fe Foam Fabricated by a Slurry Coating Process

Jin Ho Choi, Eun-Mi Jeong, Dahee Park, Sangsun Yang, Yoo-Dong Hahn, Jung-Yeul Yun

Journal of Powder Materials :: Vol.21 No.4 pp.266-270

Doi:https://doi.org/10.4150/KPMI.2014.21.4.266
Open abstract
Effect of Sintering Temperature on the Microstructure and Mechanical Properties of Solid Oxide Fuel Cell Anode Fabricated by Spark Plasma Sintering

Hye Sung Kim^*, Byung Ju Song, Ka Ram Kim

Journal of Powder Materials :: Vol.20 No.6 pp.425-431

Doi:https://doi.org/10.4150/KPMI.2013.20.6.425
Open abstract
The Effect of Binder Content for the Pore Properties of Fe Foam Fabricated by Slurry Coating Process

Jung-Yeul Yun^a*, Jin Ho Choi, Sangsun Yang, Yang-Do Kim^b,*

Journal of Powder Materials :: Vol.20 No.6 pp.439-444

Doi:https://doi.org/10.4150/KPMI.2013.20.6.439
Open abstract
Effects of Powder Morphology and Powder Preheating on the Properties and Deposition Behavior of Titanium Coating Layer Manufactured by Cold Spraying

Kee-Ahn Lee^*, Jae-Nam Hwang, Myeong-Ju Lee, Hyung-Jun Kim, Ik-Hyun Oh

Journal of Powder Materials :: Vol.19 No.5 pp.348-355

Doi:https://doi.org/10.4150/KPMI.2012.19.5.348
Open abstract