:: Journal of Powder Materials ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Microstructures and Mechanical Properties of Ti-20Mo-0.5EB Composites

Suhyun Bae, Wonki Jeong, Se-Eun Shin

Journal of Powder Materials :: Vol.28 No.5 pp.403-409

Doi:https://doi.org/10.4150/KPMI.2021.28.5.403
Open abstract
Effect of Sintering Condition on Tensile Strength of Fe-based Non-equiatomic High Entropy Alloy

Namhyuk Seo, Junhyub Jeon, Gwanghun Kim, Jungbin Park, Seung Bae Son, Seok-Jae Lee

Journal of Powder Materials :: Vol.28 No.3 pp.221-226

Doi:https://doi.org/10.4150/KPMI.2021.28.3.221
Open abstract
Improvement of Mechanical Properties of Nanocrystalline FeCrC Alloy via Strain-Induced Martensitic Transformation

Gwanghun Kim, Junhyub Jeon, Namhyuk Seo, Jungbin Park, Seung Bae Son, Seok-Jae Lee

Journal of Powder Materials :: Vol.28 No.3 pp.246-252

Doi:https://doi.org/10.4150/KPMI.2021.28.3.246
Open abstract
Influence of Milling Conditions on the Microstructural Characteristics and Mechanical Properties of Non-equiatomic High Entropy Alloy

Namhyuk Seo, Junhyub Jeon, Gwanghoon Kim, Jungbin Park, Seung Bae Son, Seok-Jae Lee

Journal of Powder Materials :: Vol.28 No.2 pp.103-109

Doi:https://doi.org/10.4150/KPMI.2021.28.2.103
Open abstract
Experimental Study on Improving Compressive Strength of Hexagonal Boron Nitride Reinforced Cement Composite

Yomin Choi, Hyun‐Gyoo Shin

Journal of Powder Materials :: Vol.27 No.6 pp.503-508

Doi:https://doi.org/10.4150/KPMI.2020.27.6.503
Open abstract
Development of Fe-Mn-based Hybrid Materials Containing Nano-scale Oxides by a Powder Metallurgical Route

Jonggyu Jeon, Jungjoon Kim, Hyunjoo Choi

Journal of Powder Materials :: Vol.27 No.3 pp.203-209

Doi:https://doi.org/10.4150/KPMI.2020.27.3.203
Open abstract
Spark Plasma Sintering of the Ni-graphite Composite Powder Prepared by Electrical Explosion of Wire in Liquid and Its Properties

Minh Thuyet-Nguyena, Jin-Chun Kim

Journal of Powder Materials :: Vol.27 No.1 pp.14-24

Doi:https://doi.org/10.4150/KPMI.2020.27.1.14
Open abstract
Structural Characteristics, Microstructure and Mechanical Properties of Fe-Cr-Al Metallic Foam Fabricated by Powder Alloying Process

Kyu-Sik Kim, Byeong-Hoon Kang, Man-Ho Park, Jung-Yeul Yun, Kee-Ahn Lee

Journal of Powder Materials :: Vol.27 No.1 pp.37-43

Doi:https://doi.org/10.4150/KPMI.2020.27.1.37
Open abstract
Effects of Sintering Additives on the Thermal and Mechanical Properties of AlN by Pressureless Sintering

Jin Uk Hwang, So Youn Mun, Sang Yong Nam, Hwan Soo Dow

Journal of Powder Materials :: Vol.26 No.5 pp.395-404

Doi:https://doi.org/10.4150/KPMI.2019.26.5.395
Open abstract
The Microstructure and the Mechanical Properties of Sintered TiO₂-Co Composite Prepared Via Thermal Hydrogenation Method

Myeongsun Ko, Ilsong Park, Jeshin Park

Journal of Powder Materials :: Vol.26 No.4 pp.290-298

Doi:https://doi.org/10.4150/KPMI.2019.26.4.290
Open abstract
Property Evaluation of Tungsten-Carbide Hard Materials as a Function of Binder

Ju-Hun Kim, Ik-Hyun Oh, Jeong-Han Lee, Sung-Kil Hong, Hyun-Kuk Park

Journal of Powder Materials :: Vol.26 No.2 pp.132-137

Doi:https://doi.org/10.4150/KPMI.2019.26.2.132
Open abstract
Effect of Porosity on Mechanical Anisotropy of 316L Austenitic Stainless Steel Additively Manufactured by Selective Laser Melting

Jeong Min Park, Jin Myoung Jeon, Jung Gi Kim, Yujin Seong, Sun Hong Park, Hyoung Seop Kim

Journal of Powder Materials :: Vol.25 No.6 pp.475-481

Doi:https://doi.org/10.4150/KPMI.2018.25.6.475
Open abstract
Study on Microstructures and Hardness of STS316L Fabricated by Selective Laser Melting

Gi Hun Shin, Joon Phil Choi, Kyung Tae Kim, Byoung Kee Kim, Ji Hun Yu

Journal of Powder Materials :: Vol.24 No.3 pp.210-215

Doi:https://doi.org/10.4150/KPMI.2017.24.3.210
Open abstract
Stretch-Flangeability of Harmonic Structure Material Manufactured by Powder Metallurgy Method

Jae Ik Yoon, Hak Hyeon Lee, Hyung Keun Park, Kei Ameyama, Hyoung Seop Kim

Journal of Powder Materials :: Vol.24 No.2 pp.128-132

Doi:https://doi.org/10.4150/KPMI.2017.24.2.128
Open abstract
Fabrication and Mechanical Properties of STS316L Porous Metal for Vacuum Injection Mold

Se Hoon Kim, Sang Min Kim, Sang Ho Noh, Jin Pyeong Kim, Jae Hyuck Shin, Si-Young Sung, Jin Kwang Jin, Taean Kim

Journal of Powder Materials :: Vol.22 No.3 pp.197-202

Doi:https://doi.org/10.4150/KPMI.2015.22.3.197
Open abstract
Microstructure and Elevated Temperature Strength of W-ZrC Composites with Micrometric and Nanosized ZrC Particles

Yoon Soo Han, Sung-Soo Ryu

Journal of Powder Materials :: Vol.21 No.6 pp.415-421

Doi:https://doi.org/10.4150/KPMI.2014.21.6.415
Open abstract
Effect of the SiC Size on the Thermal and Mechanical Properties of Reaction-bonded Silicon Carbide Ceramics

Chang-Sup Kwon, Yoon-Suk Oh, Sung-Min Lee, Yoonsoo Han, Hyun-Ick Shin, Youngseok Kim, Seongwon Kim

Journal of Powder Materials :: Vol.21 No.6 pp.467-472

Doi:https://doi.org/10.4150/KPMI.2014.21.6.467
Open abstract
Advanced Powder Processing Techniques of Ti Alloy Powders for Medical and Aerospace Applications

Hideshi Miura^*

Journal of Powder Materials :: Vol.20 No.5 pp.323-331

Doi:http://10.4150/KPMI.2013.20.5.323
Open abstract