:: Journal of Korean Powder Metallurgy Institute ::

About Us +
- Aims and Scope
- Editorial Board
For Contributors +
Journal Search +

Journal Search Engine

Effect of 50 μm class granules on the Injection Behavior of Brushite Bone Cement Prepared via Pre-dissolution Route

Da Hye Mun, Sang Cheon Lee, Kyung Sik Oh

Journal of Korean Powder Metallurgy Institute :: Vol.27 No.6 pp.468-476

Doi:https://doi.org/10.4150/KPMI.2020.27.6.468
Open abstract
Optimization of Process Condition for Fe Nano Powder Injection Molding

Joo Won Oh, Won Sik Lee, Seong Jin Park

Journal of Korean Powder Metallurgy Institute :: Vol.24 No.3 pp.223-228

Doi:https://doi.org/10.4150/KPMI.2017.24.3.223
Open abstract
Preparation of Ni(OH)2 Hollow Spheres by Solvent Displacement Crystallization Using Micro-Injection Device

Seiki Kim, Kyungsoo Parka, Kwang-Il Jung

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.4 pp.311-316

Doi:https://doi.org/10.4150/KPMI.2016.23.4.311
Open abstract
Development of Powder Injection Molding Process for a Piezoelectric PAN-PZT Ceramics

Jun Sae Han, Dong Yong Park, Dongguo Lin, Kwang Hyun Chung, Ravi Bollina, Seong Jin Park

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.2 pp.112-119

Doi:https://doi.org/10.4150/KPMI.2016.23.2.112
Open abstract
Development of Powder Injection Molding Process for Fabrication of Glass Component

Dongguo Lin, Junghyun Lee, Seong Jin Park

Journal of Korean Powder Metallurgy Institute :: Vol.23 No.1 pp.26-32

Doi:https://doi.org/10.4150/KPMI.2016.23.1.26
Open abstract
Simulation and Experiment of Injection Molding Process for Superalloy Feedstock

Im Doo Jung, Youngmoo Kim, Seong Jin Park

Journal of Korean Powder Metallurgy Institute :: Vol.22 No.1 pp.1-5

Doi:https://doi.org/10.4150/KPMI.2015.22.1.1
Open abstract
Powder Injection Molding of Translucent Alumina using Supercritical Fluid Debinding

Hyung Soo Kim, Byun Min Jong, Myung Jin Suk, Young Do Kim

Journal of Korean Powder Metallurgy Institute :: Vol.21 No.6 pp.407-414

Doi:https://doi.org/10.4150/KPMI.2014.21.6.407
Open abstract
A study on the Powder Injection Molding of Translucent Alumina via Flowability Simulation of Powder/Binder Mixture

Hyung Soo Kim, Jong Min Byun, Se Hoon Kim, Young Do Kim

Journal of Korean Powder Metallurgy Institute :: Vol.21 No.3 pp.215-221

Doi:https://doi.org/10.4150/KPMI.2014.21.3.215
Open abstract
Advanced PM Processes for Medical Technologies

Frank Petzoldt, Vera Friederici, Philipp Imgrund, Claus Aumund-Kopp

Journal of Korean Powder Metallurgy Institute :: Vol.21 No.1 pp.1-6

Doi:https://doi.org/10.4150/KPMI.2014.21.1.1
Open abstract
Preparation of Metal Injection Molded Dental Components using Spheroidized Ti Powders by Plasma Process

Sangsun Yang^a,*, Ji-Na Gwak^a,b, Jung-Yeul Yun, Ju-Yong Kim, Seongjin Park, Hyun-Seung Kim, Yong-Jin Kim, Yong-Ho Park^b,*

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.6 pp.467-473

Doi:https://doi.org/10.4150/KPMI.2013.20.6.467
Open abstract
Advanced Powder Processing Techniques of Ti Alloy Powders for Medical and Aerospace Applications

Hideshi Miura^*

Journal of Korean Powder Metallurgy Institute :: Vol.20 No.5 pp.323-331

Doi:http://10.4150/KPMI.2013.20.5.323
Open abstract
A Study on the Sintering Behavior of T42 High Speed Steel by Powder Injection Molding (PIM) Process

In-Shup Ahn^*, Dong-Wook Park, Hye-Seong Kim, Young-Sam Kwon, Kwon-Koo Cho, Su-Gun Lim

Journal of Korean Powder Metallurgy Institute :: Vol.19 No.2 pp.117-121

Doi:https://doi.org/10.4150/KPMI.2012.19.2.117
Open abstract